Related Experiment Video
Updated: Dec 28, 2025

Preparation of Graphene Liquid Cells for the Observation of Lithium-ion Battery Material
Published on: February 5, 2019
Wrapping Sb2Te3 with a Graphite Layer toward High Volumetric Energy and Long Cycle Li-Ion Batteries
Yaqing Wei1, Jiajun Chen1, Siqi Wang1
1State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology (HUST), Wuhan 430074, Hubei P. R. China.
Abstract:
Many recent efforts on the electrode design for advanced Li-ion batteries (LIBs) are often devoted to increasing the gravimetric capacity, but little attention is paid to the volumetric capacity which is more critical for practical application. Though the alloying-type anode materials are quite attractive, the challenge is that they must be composited with a large amount of carbon materials (e.g., GO, rGO, CNT) to buffer their large volume change, which would undoubtedly sacrifice the volumetric energy density of the whole electrode due to the carbon's low tap density (∼0.05 g/cm3). Herein, we propose the unique layered Sb2Te3, which possesses high conductivity and a large volumetric capacity (3419 mAh/cm3), to be served as the alternative anode for LIBs. Furthermore, we introduce natural graphite, which is low price and with high density (2.25 g/cm3), into Sb2Te3 to successfully build a novel Sb2Te3@Gra composite in which the Sb2Te3 particles are wrapped by graphite layers. Interestingly, this modified Sb2Te3@Gra exhibits much more superior cycle stability (570 mAh/g after 200 cycles, 96% retention) than pure Sb2Te3 (130 mAh/g after 200 cycles, 22% retention), while keeping its original large volumetric capacity output (∼3200 mAh/cm3) at the same time. More specially, it enables a reversible structure recovery of Sb2Te3, guaranteeing the electrode integrity and cyclability. These extraordinary phenomena are investigated in detail, whose results display that the outer graphite layer plays an important role by facilitating the intimate contact with Sb2Te3 particles and protecting them from pulverization. Besides, such graphite layer greatly promotes the electron-transfer during lithiation, helping to improve the rate capability (372 mAh/g at 2000 mA/g, 60% retention). Consequently, the assembled Sb2Te3//LiCoO2 full cell delivers a large capacity of 500 mAh/g, with stable discharge plateau and cycle stability, revealing its high potential for practical application.

