Statistical optimization of arsenic removal from synthetic water by electrocoagulation system and its application...

Arsenic presence in the water has become one of the most concerning environmental problems. Electrocoagulation is a technology that offers several advantages over conventional treatments such as chemical coagulation. In the present work, an electrocoagulation system was optimized for arsenic removal at initial concentrations of 100 µg/L using response surface methodology. The effects of studied parameters were determined by a 2³ factorial design, whereas treatment time had a positive effect and current intensity had a negative effect on arsenic removal efficiency. With a p-value of 0.1629 and a confidence of level 99%, the type of electrode material did not have a significant effect on arsenic removal. Efficiency over 90% was reached at optimal operating conditions of 0.2 A of current intensity, and 7 min of treatment time using iron as the electrode material. However, the time necessary to accomplish with OMS arsenic guideline of 10 µg/L increased from 7 to 30 min when real arsenic-contaminated groundwater with an initial concentration of 80.2 ± 3.24 µg/L was used. The design of a pilot-scale electrocoagulation reactor was determined with the capacity to meet the water requirement of a 6417 population community in Sonora, Mexico. To provide the 1.0 L/s required, an electrocoagulation reactor with a working volume of 1.79 m³, a total electrode effective surface of 701 m², operating at a current intensity of 180 A and an operating cost of 0.0208 US$/day was proposed. Based on these results, electrocoagulation can be considered an efficient technology to treat arsenic-contaminated water and meet the drinking water quality standards.