Electrochemical removal of levofloxacin using conductive graphene/polyurethane particle electrodes in a
Cuicui Guo1, Haiyang Liu1, Chengzhi Wang1
1State Environmental Protection Key Laboratory of Wetland Ecology and Vegetation Restoration, School of Environment, Northeast Normal University, Changchun, Jilin 130024, China.
Abstract:
The conductive polyurethane/polypyrrole/graphene (CPU/PPy/Gr) particle electrode was prepared by an in-situ oxidative polymerization method and used as particle electrodes to degrade levofloxacin (LEV) in a three-dimensional electrode reactor. The prepared CPU/PPy/Gr electrode was characterized systematically and the effects of initial pH, initial LEV concentration, aeration volume, voltage, and electrolyte concentration on the degradation efficiency were investigated. Results showed that more than 90% LEV was degraded and the energy consumption was 20.12 kWh/g LEV under conditions of pH 7, 6 V voltage, 2.0 L/min aeration volume, 20 mg/L initial LEV concentration, and 7 mM concentration of electrolyte (Na2SO4). A possible electrochemical oxidation pathway of LEV by the CPU/PPy/Gr electrode was proposed. In addition, the biotoxicity of LEV and its oxidation products was calculated using ECOSAR (Ecological Structure Activity Relationships) program in EPISuite. Toxicity evaluation using luminescent bacteria showed that the toxicities of some intermediates were higher than the parent compound. But the toxicity of degradation processes for LEV was effective decreasing. A possible reactive mechanism in the three-dimensional reactor was also recommended. In brief, the prepared CPU/PPy/Gr particle electrode constitutes an insight into the promising practical application in the wastewater treatment.
