Analytic approach to study a hybrid plasmonic waveguide-fed and numerically design a nano-antenna based on the new...

In this paper, a wideband InP-based hybrid plasmonic nano-antenna (HPNA) operating at telecommunication wavelengths has been proposed. Monolithically integrating InP-based lasers with hybrid plasmonic waveguide (HPW) as a feed line of the proposed HPNA on the same InGaAsP/InP wafer can increase the antenna efficiency. A new vertical director has been employed to have a highly directive horizontal radiation pattern. This enhancement is attributed to the efficient coupling between the radiation patterns of arm elements as well as reduced side lobes and back-lobes levels due to the achieved impedance matching. As a result, the directivity has been increased considerably, 3.6 dBi at 193.5 THz (1550 nm) and 1.1 dBi at 229 THz (1310 nm). The HPNA shows the high directivity, total efficiency and quality factor of 11.8, 97.49% and 94.57, respectively. Further, to verify the validity of confining the fundamental TM mode to a thin layer with the lower refractive index, both theoretical and numerical methods have been employed. Therefore, we have derived an analytical formula to investigate the HPW dispersion relation based on the transfer matrix theory and genetic algorithm. Moreover, due to the HPNA ability to receive an optical signal from free space and transmit it to the waveguide based on the reciprocity theorem, the HPNA performance as an optical wireless on-chip nano-link has been investigated analytically and numerically. Additionally, to obtain a high optical power signal and steering the beam angle, the antenna gain and directivity have been calculated with two different types of array structure by controlling the relative phase shift between the array elements and elements number. To validate the array design performance, a three dimensional full-wave numerical simulation and array factor theory have been exploited. The HPNA fabrication is compatible with generic foundry technology.