Suppressions of vibration in the Tip-Tilt mirror control system by add-on controller

Tip-Tilt mirrors play an important role in astronomical telescopes requiring the tracking performance at the level of microradian or sub-microradian. However, the closed-loop performance suffers a lot from the low-sample rate and time delay of image sensors. Especially, this issue is under the condition of vibrations, because dynamic behaviors are complex and the models are difficult to be obtained accurately. Another challenging issue comes from the measurement of vibrations and its extraction for the closed-loop control. This paper proposes a new method based on an add-on controller of the Tip-Tilt mirror to mitigate telescope vibrations. The proposed method only uses Tip-Tilt errors from an image sensor to implement a disturbance observer, which is not being restricted by an accurate model. As a result, the closed-loop performance can be optimized by designing of a proper Q-filter. To suppress the low-frequency and high-frequency vibrations, a novel Q-filter combining a lowpass filter and a bandpass filter is proposed here. The improved control method is validated by both simulation and experiment in the tip-tilt mirror control system under the condition of vibrations.