Related Experiment Video
Updated: Dec 27, 2025
Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor
Published on: October 15, 2015
Rapid granulation using calcium sulfate and polymers for refractory wastewater treatment in up-flow anaerobic sludge
Jiahao Liang1, Qinghong Wang1, Brandon A Yoza2
1State Key Laboratory of Heavy Oil Processing, State Key Laboratory of Petroleum Pollution Control, China University of Petroleum-Beijing, Beijing 102249, China.
Abstract:
Long start-up period and slow granulation are major restraints in up-flow anaerobic sludge blanket (UASB) reactors for the treatment of refractory wastewater. In this study, Calcium sulfate (CaSO4), CaSO4/guar gum (GG), and CaSO4/cationic polyacrylamide (CPAM) were used to enhance granulation during the treatment of phenolic wastewaters in UASB reactors. Use of CaSO4, CaSO4/GG, and CaSO4/CPAM increased formation of granules (>0.25 mm) by 7%, 21% and 40%, respectively, after 90 days in comparison with the control. Use of CaSO4/GG and CaSO4/CPAM at an organic loading rate of 2.89 kg chemical oxygen demand (COD) m-3 d-1 increased the COD removal efficiency by 9% and 3%, respectively, in comparison with the control (75%). The CaSO4 enhanced the granulation rate as nuclei and the subsequent dissolution of CaSO4 improves the activity of methanogens. Polymers facilitated bacteria adhesion and improved the diversity of phenols-degrading bacteria. This study describes a new method for rapid granulation in UASB reactors when treating toxic and refractory wastewaters.
