Comparison of neutron and secondary gamma dose assessment using polygon mesh and voxel computational phantoms

The newly developed mesh-type reference computational phantoms (MRCPs) represent the evolution of the previous reference phantoms and a more detailed description of the human body, addressing the voxel reference phantom limitations. These allow for a more accurate dose calculation in the human body, which in some cases results in a significant difference of the calculated quantities. In this work, the absorbed dose calculation due to neutrons and gammas was calculated using a voxel and a mesh-type computational phantom. The goal was to understand how a more accurate description of the human body affects the estimated neutron dose. The phantoms were tested in a real-case scenario: they were placed in front of a neutron Howitzer container model using PHITS. This model corresponds to the neutron Howitzer container at the Neutron Measurements Laboratory of the Energy Engineering Department of the Polytechnic University of Madrid (UPM), and at the time of measurement it was equipped with a ²⁴¹Am-Be neutron source of 74 GBq in its center. The container allows the source to be in either the irradiation or the storage position. Results show that when dealing with neutrons, the dose deviation when using GOLEM or the MRCP leads to a general 20%-30% deviation that goes up to above 400% in small thin structures such as the eye.