Related Experiment Video
Updated: Dec 26, 2025

The Effect of Construction and Demolition Waste Plastic Fractions on Wood-Polymer Composite Properties
Published on: June 7, 2020
Long-Term Compressive Strength of Polymer Concrete-like Composites with Various Fillers
1Department of Building Materials, Faculty of Civil Engineering, Warsaw University of Technology, 00-637 Warsaw, Poland.
Abstract:
The durability of building composites with polymer matrix, such as polymer concretes, is considered high or excellent. However, very few studies are available that show the properties of such composites tested long after the specimens' preparation, especially composites with fillers other than traditional rock aggregates. The paper presents the long-term compressive strength of polymer concrete containing common and alternative fine fillers, including quartz powder (ground sand) and by-products of the combustion of Polish fossil fuels (coal and lignite), tested nine or 9.5 years after preparation. The results were compiled with the data for respective specimens tested after 14 days, as well as 1.5 and 7 years. Data analysis confirmed the excellent durability of concrete-like composites with various fillers in terms of compressive strength. Density measurements of selected composites showed that the increase in strength was accompanied by an increase in volumetric density. This showed that the opinion that the development of the strength of composites with polymer matrices taking place within a few to several days was not always justified. In the case of a group of tested concrete-like composites with vinyl-ester matrices saturated with fly ashes of various origins, there was a further significant increase in strength over time.
Related Concept Videos
Fiber Reinforced Concrete
Additives and Fillers in Concrete
The...
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
Relation Between Tensile Strength and Compressive Strength of Concrete
Fatigue Strength of Concrete
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...

