Related Experiment Video
Updated: Dec 26, 2025

Fabrication of a Solution-gated Indium-Tin-Oxide-based One-piece Transistor Enabling Sensitive Biosensing
Published on: August 29, 2025
Effect of nitrogen-doping on drain current modulation characteristics of an indium-gallium-zinc oxide thin-film
Keonwon Beom1, Minju Kim1, Hyerin Lee1
1Department of Materials Science and Engineering, Myongji University, Gyeonggi-do 17058, Republic of Korea.
Abstract:
The effect of nitrogen-doping (N-doping) in an indium-gallium-zinc oxide (IGZO) channel layer on the analog, linear, and reversible drain current modulation in thin-film transistors (TFTs) with Al-top-gate/SiOx/TaOx/IGZO stack is investigated for potential application to artificial synaptic devices. The N-doped devices exhibit a more linear increase of drain current upon repeating positive gate biasing, corresponding to synaptic potentiation, while the undoped device shows a highly non-linear and abrupt increase of drain current. Distinct from the increase of drain current at positive biasing for potentiation, the decrease of drain current for depression behavior at negative biasing is found to be the same. Whereas the increase of drain current becomes more linear, the channel conductance, the magnitude of its change, and its changing speed are decreased by the N-doping. The partial replacement of oxygen with nitrogen, having higher binding energy with metal-cations, suppresses oxygen vacancy formation, then decreases the channel conductance. It also retards the migration of oxygen ions, then leads to a linear increase of drain current. These results reveal that the characteristics of tunable drain current such as its linearity, dynamic range, and speed could be controlled by altering the internal state of the IGZO channel, which is crucial for application to an artificial synapse in a neuromorphic system.
Related Concept Videos
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
Characteristics of JFET
The core of a JFET's operation is controlling drain current by modulating the gate-source voltage. When the drain and gate voltage are set to zero, the JFET exhibits no net current flow, representing a state of equilibrium. The drain current increases linearly as the...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...

