Reasonable design and sifting of microporous carbon nanosphere-based surface molecularly imprinted polymer for...

Highly selective surface molecularly imprinted polymer (SMIP) was prepared on glucose-derived microporous carbon nanospheres (GMCNs) by surface molecular imprinting technology for the removal of phenol from wastewater. GMCNs with rich pore structure and surface oxygenic functional groups were adopted as support materials, on which the active layers were constructed by grafting silane coupling agent 3-(methacryloyloxy) propyltrimethoxysilane. Then with phenol as template molecule, different types and amounts of functional monomer (including methacrylic acid and 4-vinylpyridine (4-VP)) were screened for optimizing imprinting conditions suitable for phenol adsorption, and a series of SMIP was obtained through crosslinking polymerization. The adsorption behaviors of SMIP were evaluated by UV spectrophotometry. The results show that, when 4-VP is used as functional monomer, the resultant 4-VP/SMIP exhibites an excellent adsorption capacity of 85.72 mg g^-1. The relative selectivity factor for phenol against hydroquinone, p-nitrophenol and p-tert-butylphenol is 8.38, 7.96 and 6.67, respectively, indicating outstanding adsorption capacity and selectivity of 4-VP/SMIP. The pseudo-second-order model and Langmuir‒Freundlich model fit better than other models for the adsorption of phenol. 4-VP/SMIP is promising for selective removal and enrichment recovery towards phenol in wastewater.