Related Experiment Video
Updated: Dec 26, 2025

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Influence of High-Temperature Liquid on Phase Composition and Morphology of Carbothermal Reduction-Nitridation
Hudie Yuan1, Hongfeng Yin1, Yun Tang1
1College of Materials Science & Engineering, Xi'an University of Architecture & Technology, Xi'an 710055, China.
Abstract:
In this paper, the products using three kinds of coal gasification slags as starting materials were obtained via carbothermal reduction-nitridation at 1450 °C. The effects of high-temperature liquid on the phase composition and morphology of the samples were investigated by XRD and SEM, while the content of high-temperature liquid was calculated by the computer software package FactSage. The results show that: (1) the existence of high-temperature liquid phase is beneficial to the formation and growth of Ca-α-SiAlON phase; (2) The formation of long-columnar Ca-α-SiAlON were greatly affected by the content and viscosity of liquid phase, which is in non-linear relationship with aspect ratios of Ca-α-SiAlON. Among the three kinds of slags, the HT slag with relatively high liquid phase content and the lowest viscosity is the most favorable to the growth of elongated Ca-α-SiAlON grain; the aspect ratio of the formed Ca-α-SiAlON is the largest; Compared to the SH slag with the highest liquid phase content and viscosity, Ca-α-SiAlON prepared from TE slag possesses the smallest aspect ratio, which exhibits equiaxed grain morphology.
More Related Videos
Related Concept Videos
Phase Diagrams
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...

