Related Experiment Video
Updated: Dec 26, 2025

Fabrication of Gate-tunable Graphene Devices for Scanning Tunneling Microscopy Studies with Coulomb Impurities
Published on: July 24, 2015
Tunable 1/f Noise in CVD Bernal-Stacked Bilayer Graphene Transistors
Mengchuan Tian1, Qianlan Hu1, Chengru Gu1
1Wuhan National High Magnetic Field Center and School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan 430074, China.
Abstract:
Low-frequency noise is a key performance-limiting factor in almost all electronic systems. Thanks to its excellent characteristics such as exceptionally high electron mobility, graphene has high potential for future low-noise electronic applications. Here, we present an experimental analysis of low-frequency noise in dual-gate graphene transistors based on chemical vapor-deposited Bernal-stacked bilayer graphene. The fabricated dual-gate bilayer graphene transistors adopt atomic layer-deposited Al2O3 and HfSiO as top-gate and back-gate dielectric, respectively. Our results reveal an obvious M-shape gate-dependent noise behavior which can be well described by a quantitative charge-noise model. The minimal area normalized noise spectral density at 10 Hz reaches as low as about 3 × 10-10 μm2·Hz-1 at room temperature, much lower than the best results reported previously for graphene devices. In addition, the observed noise level further decreases by more than 10 times at temperature of 20 K. Meanwhile, the noise spectral density amplitude can be tuned by more than 2 orders of magnitude at 20 K by dual-gate voltages.
More Related Videos
05:39Scalable Quantum Integrated Circuits on Superconducting Two-Dimensional Electron Gas Platform
Published on: August 2, 2019
11:33All-electronic Nanosecond-resolved Scanning Tunneling Microscopy: Facilitating the Investigation of Single Dopant Charge Dynamics
Published on: January 19, 2018
Related Concept Videos
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
Cut-off Frequency of BJT
Alpha Cut-Off Frequency: Pertinent to the common-base configuration, the alpha cut-off frequency defines the upper-frequency limit at which the current gain, alpha, remains stable. As...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Small-Signal Analysis of MOSFET Amplifiers
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...