Related Experiment Video
Updated: Dec 25, 2025

Clean Sampling and Analysis of River and Estuarine Waters for Trace Metal Studies
Published on: July 1, 2016
Assessment and source quantification of heavy metal(loid)s in surface water using multivariate analyses from the
Binh Thanh Nguyen1, Vinh Ngoc Nguyen2, Huong Thu Thi Truong1
1Institute of Environmental Science, Engineering, and Management, Industrial University of Ho Chi Minh City, 12 Nguyen Van Bao, Go Vap District, Ho Chi Minh City, Vietnam.
Abstract:
The metal concentration in surface water of a river could be affected by season, position, and oceanic process such as tide. The current study aimed to (1) examine the heavy metal(loid) concentration in surface water from the Saigon River as affected by the combination of season, tide, and position and (2) apportion and quantify pollution sources. Ninety-six surface water samples were collected from 13 sites on the River in four campaigns (rainy season + ebb tide, rainy season + flood tide, dry season + ebb tide, and dry season + flood tide). Eight heavy metal(loid)s (Al, B, Bi, Fe, Mn, Pb, Sr, and Zn) were measured and subjected to multivariate analyses. Three-way ANOVA showed that in the rainy season, the total concentration of the metal(loid)s (TCM) in two tides was not clearly different from each other while in the dry season the TCM was significantly higher during the ebb tide than during the flood tide. Principal component analysis/factor analysis and Pearson correlation matrix showed that the TCM could be derived from three main sources, grouped into anthropogenic activities such as industrial, agricultural, and domestic wastes from inside Ho Chi Minh city, and natural origins from lowland area and acid sulfate soil. Three pollution sources explained 70% and 68% of the total variance of TCM in the rainy and dry seasons, respectively. In brief, the metal(loid) concentration was significantly affected by the season and tide and the pollution sources could be derived from inside Ho Chi Minh City and from lowland areas beyond the river estuary.
Related Concept Videos
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Precipitation and Co-precipitation
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
Gravimetry: Overview
In precipitation gravimetry, the analyte is converted into a precipitate and weighed. For example, the silver content in a sample can be estimated by precipitating and...

