Enhanced Power Conversion Efficiency of Dye-Sensitized Solar Cells by Band Edge Shift of TiO₂ Photoanode

By simple soaking titanium dioxide (TiO₂) films in an aqueous Na₂S solution, we could prepare surface-modified photoanodes for application to dye-sensitized solar cells (DSSCs). An improvement in both the open-circuit voltage (V) and the fill factor (FF) was observed in the DSSC with the 5 min-soaked photoanode, compared with those of the control cell without any modification. The UV-visible absorbance spectra, UPS valence band spectra, and dark current measurements revealed that the Na₂S modification led to the formation of anions on the TiO₂ surface, and thereby shifted the conduction band edge of TiO₂ in the negative (upward) direction, inducing an increase of 29 mV in the V. It was also found that the increased FF value in the surface-treated device was attributed to an elevation in the shunt resistance.