Related Experiment Video
Updated: Dec 25, 2025

Fabrication of High Contrast Gratings for the Spectrum Splitting Dispersive Element in a Concentrated Photovoltaic System
Published on: July 18, 2015
Design and analysis of a grating assisted hybrid mode and polarization division (de)multiplexer
Abstract:
In this paper, a hybrid mode and polarization division (MDM-PDM) (de)multiplexer based on a buried strip waveguide, operating at 1550 nm, is proposed on the silicon-on-insulator platform. The proposed device can (de)multiplex three quasi-transverse electric and two quasi-transverse magnetic modes of a multimode waveguide concurrently. The multiplexing and demultiplexing operations are achieved by coupling the multimode waveguide modes with the fundamental modes of the single-mode waveguides. The couplings between the modes are realized by employing grating structures in between the multimode and single-mode waveguides. A 2.5D finite-difference time-domain simulation technique is used to examine the performance of the device. An insertion loss of >-0.76dB, return loss of <-11.23dB, and crosstalk of <-12.42dB are obtained for the proposed hybrid MDM-PDM (de)multiplexer. Moreover, the fabrication tolerance of the proposed device structure is studied by keeping the center-to-center distance between the waveguides constant and by varying the waveguide width.
More Related Videos
Related Concept Videos
Design Example: Capacitance Multiplier Circuit
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.
¹H NMR: Complex Splitting
Splitting diagrams or splitting tree diagrams are routinely used to depict such complex couplings. While drawing splitting diagrams, the splitting with the larger coupling constant is usually applied...
Double Resonance Techniques: Overview
Spin decoupling is usually achieved by...

