2019 Topical Meeting on Optical Interference Coatings: introduction
Applied Optics
|April 1, 2020
Summary
The fourteenth Topical Meeting on Optical Interference Coatings showcased advances in optical coatings. Research covered design, materials, and applications from displays to space missions.
Area of Science:
- Optics and Photonics
- Materials Science
Background:
- The fourteenth Topical Meeting on Optical Interference Coatings convened in New Mexico, USA.
- This triennial conference serves as a key global forum for the optical interference coatings community.
Purpose of the Study:
- To present and discuss recent research and development in optical interference coatings.
- To foster technical interchange among global experts in the field.
Main Methods:
- The meeting featured presentations on various aspects of optical interference coatings.
- Topics included fundamental research, new materials, and advanced deposition and characterization techniques.
Main Results:
- A broad spectrum of research was presented, from theoretical design to practical applications.
- Advances were highlighted in areas such as electronic displays, laser technology, and space optics.
Conclusions:
- The conference successfully facilitated the exchange of cutting-edge information in optical interference coatings.
- The diverse applications discussed underscore the growing importance of this technology across multiple sectors.
More Related Videos
Related Concept Videos
02:18Interference and Diffraction
51.3K
Interference is a characteristic phenomenon exhibited by waves. When two electromagnetic waves interact with their peaks and troughs coinciding, a resulting wave with enhanced amplitude is produced. This is known as constructive interference. In this case, the two waves interacting are in phase with each other.
51.3K
01:30Atomic Emission Spectroscopy: Interference
525
In atomic emission spectroscopy (AES), high-temperature atomizers excite a broad range of elements and molecules that generate complex emissions from sources such as oxides, hydroxides, and flame combustion products in the flame or plasma. Several strategies can be employed to minimize spectral interferences caused by overlapping emission lines or bands. These include increasing instrument resolution, choosing alternative emission lines, optimally placing the detector in low-background regions,...
525
01:26Phase Contrast and Differential Interference Contrast Microscopy
11.8K
Phase-Contrast Microscopes
In-phase-contrast microscopes, interference between light directly passing through a cell and light refracted by cellular components is used to create high-contrast, high-resolution images without staining. It is the oldest and simplest type of microscope that creates an image by altering the wavelengths of light rays passing through the specimen. Altered wavelength paths are created using an annular stop in the condenser. The annular stop produces a hollow cone of...
In-phase-contrast microscopes, interference between light directly passing through a cell and light refracted by cellular components is used to create high-contrast, high-resolution images without staining. It is the oldest and simplest type of microscope that creates an image by altering the wavelengths of light rays passing through the specimen. Altered wavelength paths are created using an annular stop in the condenser. The annular stop produces a hollow cone of...
11.8K
01:25Atomic Absorption Spectroscopy: Interference
1.9K
Interference leads to systematic error in atomic absorption (AA) measurements by enhancing or diminishing the analytical signal or the background. These interferences can be grouped into three main categories: spectral interference, chemical interference, and physical interference.
Spectral interference occurs when signals from other elements or molecules overlap with the analyte signal, falsely elevating or masking the analyte's absorbance. This interference can be corrected using Zeeman,...
Spectral interference occurs when signals from other elements or molecules overlap with the analyte signal, falsely elevating or masking the analyte's absorbance. This interference can be corrected using Zeeman,...
1.9K
01:16Confocal Fluorescence Microscopy
19.7K
Confocal microscopy is an advanced microscopic technique. The prime advantage of the confocal microscope over other microscopy techniques is its ability to block the out-of-focus light from the illuminated samples using pinholes. It is widely used with fluorescence optics to obtain high-resolution, sharp contrast images. Unlike optical microscopes, confocal microscopes use a focused beam of light laser to scan the entire sample surface at different z-planes. These microscopes are, therefore,...
19.7K
01:05Total Internal Reflection Fluorescence Microscopy
10.9K
Total internal reflection fluorescence microscopy or TIRF is an advanced microscopic technique used to visualize fluorophores in samples close to a solid surface with a higher refractive index, such as a glass coverslip. TIRF only allows fluorophores in proximity to the solid surface to be excited. When light from a medium with a lower refractive index (such as air) hits the glass coverslip at a critical angle, the light undergoes total internal reflection stead of passing through the glass.
10.9K