Related Experiment Video
Updated: Dec 25, 2025

Synthesis of Ionic Liquid Based Electrolytes, Assembly of Li-ion Batteries, and Measurements of Performance at High Temperature
Published on: December 20, 2016
Cobalt Extraction from Sulfate/Chloride Media with Trioctyl(alkyl)phosphonium Chloride Ionic Liquids
Dairo E Chaverra1,2, Oscar J Restrepo-Baena1, María C Ruiz2
1Department of Materials and Minerals, School of Mines, Universidad Nacional de Colombia, Calle 59A No. 63-20 Bloque 54, Medellín 050034, Colombia.
Abstract:
The application of phosphonium-based ionic liquids (ILs) on the selective extraction of cobalt is presented. The extraction mechanism is established, and different parameters of the process are evaluated. It has been found that it is possible to extract cobalt from aqueous solutions in sulfate media, with the addition of sodium chloride, using phosphonium ILs. The cobalt extraction was selective with respect to nickel and strongly dependent on the chloride concentration in the aqueous solution. The cobalt extraction is given by an anion exchange mechanism through an endothermic process. Cobalt extractions greater than 98% were obtained using the proposed methods. Cobalt stripping from the loaded IL phase using water was proved. Therefore, an alternative extraction process to traditional organic solvents is proposed. This alternative has additional advantages such as easy handling, lower costs in reagents and equipment, and risk reduction.
Related Concept Videos
Extraction: Advanced Methods
Precipitation and Co-precipitation
Qualitative Analysis
For instance, group IV...
Precipitation of Ions
The equation that describes the equilibrium between solid calcium carbonate and its solvated ions is:
Formation of Complex Ions
Colloidal precipitates

