A high power laser facility to conduct annealing tests at high temperature

The knowledge of material properties and their behavior at high temperatures is of crucial importance in many fields. For instance, annealing phenomena occurring during the thermomechanical processing of materials, such as recrystallization, have long been recognized as being both of scientific interest and technological importance. Different methods are currently used to study annealing phenomena and submit metals to heat loads. In this work, we present the design and the development of a laser-based facility for annealing tests. This experimental setup enables studies at the laboratory scale with great flexibility to submit samples to various spatial and temporal heating profiles. Due to the possibility of having optical access to the sample, laser heating can be combined with several non-contact diagnostics such as infrared imaging to control and analyze the temperature gradients. As a case study, we present a set of experiments performed to study the recrystallization kinetics of tungsten. We demonstrate that samples can be heated linearly with heating rate up to ∼2000 K/s, at temperatures above 2000 K, for seconds or hours, with typical errors in the temperature measurement of around 1% that depend mainly on the determination of sample emissivity. Such studies are of crucial interest in the framework of nuclear fusion since the international thermonuclear experimental reactor nuclear reactor will operate with a full-W divertor.