Improving the Performance of Blue Polymer Light-Emitting Diodes Using a Hole Injection Layer with a High Work
Zhiming Zhong1, Yawei Ma1, Hongli Liu2
1Institute of Polymer Optoelectronic Materials and Devices, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, China.
Abstract:
For light-emitting polymers with a deep highest occupied molecular orbital energy level used for polymer light-emitting diodes (PLEDs), the hole injection barrier and hole transport of the anode buffer layer are of vital importance for optimizing electroluminescent performance. In this study, high-work-function hole injection layers with nanotextures were achieved by modifying poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) with a perfluorinated ionomer (PFI) and n-butyl alcohol and were used to achieve a single-layer device without a hole transport layer. With such an interlayer, the PLEDs based on PPF-SO25 exhibit remarkable current efficiency over 13.0 cd A-1, which significantly outperform the devices with regular PEDOT:PSS. To our knowledge, this performance is among the best reported for single-layer blue PLEDs. The bias-dependent capacitance curves of these PLEDs suggest a nonuniform surface distribution of PFI. Our findings show that the PFI-modified PEDOT:PSS not only operates as a high-work-function hole injection layer to facilitate hole injection but also as a potential inner scattering medium for light extraction.
