Related Experiment Video
Updated: Dec 24, 2025

Extraction of Organochlorine Pesticides from Plastic Pellets and Plastic Type Analysis
Published on: July 1, 2017
Effects of polymer aging on sorption of 2,2',4,4'-tetrabromodiphenyl ether by polystyrene microplastics
Juan Wu1, Pengcheng Xu1, Qinghua Chen1
1Qingdao Engineering Research Center for Rural Environment, Qingdao Agricultural University, Qingdao, 266109, China.
Abstract:
The sorption behavior of 2,2',4,4'-tetrabromodiphenyl ether (BDE-47) on aged polystyrene (PS) microplastics via seawater soaking, ultraviolet (UV) irradiation, seawater soaking and UV irradiation together was investigated. The effects of environmental factors including salinity, pH, and dissolved organic matter (DOM) on sorption of BDE-47 by the aged PS microplastics were analyzed. The equilibrium sorption capacity of BDE-47 by virgin PS, aged PS with seawater soaking, aged PS with UV irradiation and aged PS with seawater soaking and UV irradiation was 6.16, 4.96, 3.53, and 3.75 ng/g, respectively. The decrease in sorption capacity was related to the increase of surface crystallinity and the appearance of surface oxygen-containing functional groups. The kinetic and isotherm models suggested that aging did not change the sorption mechanism of BDE-47 on PS microplastics. pH had negligible impacts on BDE-47 sorption by virgin and aged PS. Sorption capacity of BDE-47 on aged PS in water with high salinity was lower than that on virgin PS, and DOM has less effect on the sorption of BDE-47 on aged PS.
Related Concept Videos
Polymer Classification: Architecture
Polymer Classification: Stereospecificity
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the polymer...
Molecular Weight of Step-Growth Polymers
As the step-growth polymerization involves step-wise condensation of monomers, the molecular weight also builds up eventually. Consequently, high molecular weight polymers are obtained at the late stages of the polymerization, where 99% of monomers have been consumed.
The extent of the...
Polymers: Molecular Weight Distribution

