Dual aptamer assay for detection of Acinetobacter baumannii on an electromagnetically-driven microfluidic platform

Rapid detection of Acinetobacter baumannii (AB) is critical for limiting healthcare-associated infections and providing the best treatment for infected individuals. Herein an integrated microfluidic device for AB diagnosis utilizing a new dual aptamer assay was developed for point-of-care (POC) applications; magnetic beads coated with AB-specific aptamers were used to capture bacteria, and quantum dots (QD) bound to a second aptamer were utilized to quantify the amount of bacteria with a light-emitting diode (LED)-induced fluorescence module integrated into the device. Within a rapid detection of 30 min, a limit of detection of only 100 colony-forming units (CFU)/reaction was obtained, and all necessary microfluidic devices were actuated by a combination of permanent magnets and electromagnets. The pumping rate of the micropump was 270 μL/min at only 10 V, which is amenable for POC applications with lower power consumption, and only 10 μL of sample and reagents were required. Given these attributes, an automatic POC device was demonstrated which could perform a dual aptamer assay to diagnose AB by using electromagnetically-driven microfluidic system. This system provides a rapid, sensitive, low power and reagents consumption and fully automated for AB detection by using a dual aptamer assay. It will allow rapid clinical diagnosis of AB in the near future.