Nanoplatelet-Based Light-Emitting Diode and Its Use in All-Nanocrystal LiFi-like Communication

Now that colloidal nanocrystals (NCs) have been integrated as green and red sources for liquid crystal displays, the next challenge for quantum dots is their use in electrically driven light-emitting diodes (LEDs). Among various colloidal NCs, nanoplatelets (NPLs) have appeared as promising candidates for light-emitting devices because their two-dimensional shape allows a narrow luminescence spectrum, directional emission, and high light extraction. To reach high quantum efficiency, it is critical to grow core/shell structures. High temperature growth of the shells seems to be a better strategy than previously reported low-temperature approaches to obtain bright NPLs. Here, we synthesize CdSe/CdZnS core/shell NPLs whose shell alloy content is tuned to optimize the charge injection in the LED structure. The obtained LED has exceptionally low turn-on voltage, long-term stability (>3100 h at 100 cd m^-2), external quantum efficiency above 5%, and luminance up to 35,000 cd m^-2. We study the low-temperature performance of the LED and find that there is a delay of droop in terms of current density as temperature decreases. In the last part of the paper, we design a large LED (56 mm² emitting area) and test its potential for LiFi-like communication. In such an approach, the LED is not only a lightning source but also used to transmit a communication signal to a PbS quantum dot solar cell used as a broadband photodetector. Operating conditions compatible with both lighting and information transfer have been identified. This work paves the way toward an all NC-based communication setup.