Related Experiment Video
Updated: Dec 24, 2025

Flow-assisted Dielectrophoresis: A Low Cost Method for the Fabrication of High Performance Solution-processable Nanowire Devices
Published on: December 7, 2017
Nanowire Tunnel FET with Simultaneously Reduced Subthermionic Subthreshold Swing and Off-Current due to Negative
Ali Saeidi1, Teodor Rosca1, Elvedin Memisevic2
1Ecole Polytechnique Federale de Lausanne, Lausanne, Switzerland.
Abstract:
Nanowire tunnel field-effect transistors (TFETs) have been proposed as the most advanced one-dimensional (1D) devices that break the thermionic 60 mV/decade of the subthreshold swing (SS) of metal oxide semiconductor field-effect transistors (MOSFETs) by using quantum mechanical band-to-band tunneling and excellent electrostatic control. Meanwhile, negative capacitance (NC) of ferroelectrics has been proposed as a promising performance booster of MOSFETs to bypass the aforementioned fundamental limit by exploiting the differential amplification of the gate voltage under certain conditions. We combine these two principles into a single structure, a negative capacitance heterostructure TFET, and experimentally demonstrate a double beneficial effect: (i) a super-steep SS value down to 10 mV/decade and an extended low slope region that is due to the NC effect and, (ii) a remarkable off-current reduction that is experimentally observed and explained for the first time by the effect of the ferroelectric dipoles, which set the surface potential in a slightly negative value and further blocks the source tunneling current in the off-state. State-of-the-art InAs/InGaAsSb/GaSb nanowire TFETs are employed as the baseline transistor and PZT and silicon-doped HfO2 as ferroelectric materials.
More Related Videos
11:33All-electronic Nanosecond-resolved Scanning Tunneling Microscopy: Facilitating the Investigation of Single Dopant Charge Dynamics
Published on: January 19, 2018
12:20Fabrication of Carbon Nanotube High-Frequency Nanoelectronic Biosensor for Sensing in High Ionic Strength Solutions
Published on: July 22, 2013
Related Concept Videos
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
Field Effect Transistor
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...