Related Experiment Video
Updated: Dec 23, 2025

Waste Water Derived Electroactive Microbial Biofilms: Growth, Maintenance, and Basic Characterization
Published on: December 29, 2013
Self-induced bioelectro-potential influence on sulfate removal and desalination in microbial fuel cell
Manupati Hemalatha1, J Shanthi Sravan1, S Venkata Mohan1
1Bioengineering and Environmental Sciences Lab, Department of Energy and Environmental Engineering, CSIR-Indian Institute of Chemical Technology (CSIR-IICT), Hyderabad 500 007, India; Academy of Scientific and Innovative Research (AcSIR), CSIR-Indian Institute of Chemical Technology (CSIR-IICT) Campus, Hyderabad 500 007, India.
Abstract:
This study focused on treatment of sulfate-rich produced water (PW) using microbial fuel cell (MFC) with biotic anode (bAC) and abiotic cathode (aCC) separated by a cation exchange membrane (CEM). MFC was operated under varied circuitry modes - open circuit (OC-without resistance) and closed circuit (CC-applied resistance (1kΩ)) to evaluate and assess the removal of sulfates and salts with simultaneous carbon utilization. The OC and CC operations depicted sulfates removal efficiency of 38% and 56%, salinity removal of 12% and 21% and COD removal of 47% and 58%, respectively. Both OC and CC showed K+ decrement in bAC and increment in aCC with a comparatively higher efficiency of ionic mobility in CC operation. Maximum open circuit voltage (OCV) of 498 mV (OC) was observed with redox catalytic peak currents from cyclic voltammetry [Anode/cathode, 3.5/-4.9 mA (OC); 6.9/-7.9 mA (CC)]. Dominance of Proteobacteria and Actinobacteria with specific enrichment of sulfate reducing bacteria (SRB) and halophiles was observed in bAC at the end of operation.
Related Concept Videos
Electrolysis
Standard Electrode Potentials
Potentiometry: Membrane Electrodes
Controlled-Potential Coulometry: Electrolytic Methods
The chosen potential...
Concentration Cells
Consider the following voltaic cell:
Bioremediation

