Related Experiment Video
Updated: Dec 23, 2025

Evaluation of an Exclusive Spur Dike U-Turn Design with Radar-Collected Data and Simulation
Published on: February 1, 2020
MIMU/Odometer Fusion with State Constraints for Vehicle Positioning during BeiDou Signal Outage: Testing and Results
Kai Zhu1,2, Xuan Guo1, Changhui Jiang3
1School of Automobile and Traffic Engineering, Jiangsu University of Technology, Changzhou 213001, China.
Abstract:
With the rapid development of autonomous vehicles, the demand for reliable positioning results is urgent. Currently, the ground vehicles heavily depend on the Global Navigation Satellite System (GNSS) and the Inertial Navigation System (INS) providing reliable and continuous navigation solutions. In dense urban areas, especially narrow streets with tall buildings, the GNSS signals are possibly blocked by the surrounding tall buildings, and under this condition, the geometry distribution of the in-view satellites is very poor, and the None-Line-Of-Sight (NLOS) and Multipath (MP) heavily affects the positioning accuracy. Further, the INS positioning errors will quickly diverge over time without the GNSS correction. Aiming at improving the position accuracy under signal challenging environment, in this paper, we developed an MIMU(Micro Inertial Measurement Unit)/Odometer integration system with vehicle state constraints (MO-C) for improving the vehicle positioning accuracy without GNSS. MIMU/Odometer integration model and the constrained measurements are given in detail. Several field tests were carried out for evaluating and assessing the MO-C system. The experiments were divided into two parts, firstly, field testing with data post-processing and real-time processing was carried out for fully assessing the performance of the MO-C system. Secondly, the MO-C was implemented in the BeiDou Satellite Navigation System (BDS)/integrated navigation system (INS) for evaluating the MO-C performance during the BDS signal outage. The MIMU standalone positioning accuracy was compared with that from the MIMU/Odometer integration (MO), MO-C and MIMU with constraints (M-C) for assessing the Odometer, and the influence of the constraint on the positioning errors reduction. The results showed that the latitude and longitude errors could be suppressed with Odometer assisting, and the height errors were suppressed while the state constraints were included.
More Related Videos
Related Concept Videos
Design Example: Identifying the Locations of Monuments in the Field Using Global Positioning System Device
Errors in Global Positioning System
The Midpoint Formula
Bus Impedance Matrix
In the first circuit, all machine voltage sources are short-circuited, leaving only the prefault voltage source at the fault location. The positive-sequence bus impedance matrix can be determined by solving the nodal equations,...
Root-Locus Method
This system can be represented by a block...
Types of Global Positioning System Surveys

