Influence of silicate on the structural memory effect of layered double hydroxides for the immobilization of selenium

The influence of silicate on the structural memory effect of layered double hydroxides (LDHs) has been rarely reported. In this study, five kinds of calcined LDHs (CLDHs) were synthesized and used as adsorbents for the sorption of selenium with or without silicate, under the initial pH 10 and 13, respectively, characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), infrared spectroscopy (IR), nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), and N₂ adsorption-desorption isotherm. The results indicated that silicate can significantly affect the phase transformation of CLDHs, and the sorption amounts of selenite and selenate dramatically decreased in the presence of silicate. Specifically, silicate can react with MgO and Al₂O₃ in CLDHs to generate magnesium silicate hydrate and geopolymer-like substance which were covered on the surface of particles, blocking the hydroxylation of metal oxides. However, higher pH suppressed the interaction between MgO and silicate and enhanced the formation of geopolymer-like substance, which promoted the regeneration of LDHs. Al in CLDHs plays a critical role in the regeneration of LDHs. Besides, the ternary oxides (CLDH-2, Mg₂Al_0.75Fe_0.25-oxide; CLDH-3, Mg₂Al_0.5Fe_0.5-oxide) possessed larger specific surface areas (127.7 and 158.2 m²/g) and consequently presented more resistance to the effect of silicate.