Related Experiment Video
Updated: Dec 23, 2025

A Bending Test for Determining the Atterberg Plastic Limit in Soils
Published on: June 28, 2016
Evaluation of shallow foundation bearing capacity in the case of a two-layered soil and spatial variability in soil
Marcin Chwała1, Wojciech Puła1
1Department of Geotechnology, Hydro Technology, and Underground and Hydro Engineering, Wroclaw University of Science and Technology, Wrocław, Poland.
Abstract:
In this study, a probabilistic approach for evaluating the bearing capacity of surface footings is discussed. The evaluation is based on a kinematic approach. The considered substrate consists of two different layers of soil: a top layer formed of medium or dense sand followed by a layer of soft clay. The sand layer is assumed to be homogenous, whereas the undrained shear strength of the soft clay layer is assumed to be spatially variable, described by a lognormal random field. The random field is discretized according to Vanmarcke's spatial averaging along dissipation regions in the considered failure mechanism. The mechanism utilizes plane strain conditions; however, due to consideration of the soil spatial variability in three dimensions, the impact of the length of the foundation on the random bearing capacity evaluation is considered in this study. As a result of the discretization procedure, a set of correlated random variables is obtained (each associated with an individual dissipation region in the failure mechanism). A series of numerical analyses are performed for two thicknesses of the first layer and a set of anisotropic correlation structures for the spatial variability of the undrained shear strength. The proposed method is computationally efficient and allows consideration of three-dimensional spatial variability in soil strength properties. The results are discussed and compared with those obtained by other methods.
Related Concept Videos
Dynamic Modulus of Elasticity of Concrete
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by a...
Stresses under Combined Loadings
The process begins by slicing the tube at critical points and analyzing the internal forces and stress components at these sections, focusing on the centroid. Normal stresses, generated by axial forces and bending moments, are either compressive or tensile and vary across the section from...
Design Consideration
The factor of safety is another key...
Beams with Unsymmetric Loadings
The first moment-area theorem determines the slope at any point on the beam. This theorem indicates that the change in slope between two points on a beam...
Tensile Strength Considerations of Concrete
The dimensions and shape of a concrete specimen...
Stress: General Loading Conditions
The shearing force, possessing potential directionality within the plane of the section, is simplified into two component forces running parallel to the x and y axes....

