New Materials Based on Ethylene Propylene DieneTerpolymerand Hemp Fibers Obtained by Green Reactive Processing

The paper presents the obtaining of new green polymeric composites using a sustainable reactive processing method, namely electron beam irradiation. EPDM rubber mixtures were reinforced with different amounts of short hemp fibers, which were then irradiated at doses between 75 and 600 kGy. The samples were analyzed by determination of physical-mechanical properties, sol-gel analysis, crosslink density (using the well-known modified Flory-Rehner equation for tetra functional networks), determination of rubber-fiber interactions (using the Kraus equation), water uptake test and FTIR analysis. The obtained results indicate an improvement of the hardness, the tensile and tear strength as the quantity of hemp fibers increases. As the irradiation dose increases, there is an increase in the degree of crosslinking and the gel fraction. Analyzing the behavior of the irradiation samples using the Charlesby-Pinner equation, it is observed that all the samples tend to crosslink by irradiation, the share of degradation reactions being low. For these reasons, the new materials can be used in the food, pharmaceutical or medical field, because the obtained products are sterile and can be easily resterilized by irradiation. They have high elasticity values and can be used to make packaging, seals and other consumer goods.