Related Experiment Video
Updated: Dec 22, 2025

Electrochemically and Bioelectrochemically Induced Ammonium Recovery
Published on: January 22, 2015
Study on the experimental performance by electrolysis-integrated ecological floating bed for nitrogen and phosphorus
Cheng Yan1, Mingxuan Wang1, Tangming Ma1
1State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing, 210023, P.R. China.
Abstract:
The new-type electrolysis-integrated ecological floating beds (EEFBs) were set up to study their water removal ability due to the excellent water treatment capacity of electrolysis, this enhanced EEFBs were made of polyethylene filled with biochar substrate and in middle of the substrate placed the Mg-Al alloy served as anode and graphite served as cathode. The results show that removal rates of total nitrogen (TN), ammonia nitrogen (NH3-N), total phosphorus (TP) and phosphate (PO43--P) by the EEFBs increased 53.1%, 96.5%, 76.5% and 74.5%, respectively. The electrolysis reaction was the main pathway for TN and TP removals in the EEFBs. A higher concentration of hydrogen autotrophic denitrification bacteria was recorded in the substrate of the EEFBs than that in the traditional ecological floating beds (EFBs) (p < 0.05), suggesting that the electrolysis may have enhanced the NO3--N removal efficiency of the EEFBs by promoting the growth and reproduce of hydrogen autotrophic denitrification bacteria. The in-situ formation of Mg2+ and Al3+ ions from a sacrificial Mg-Al alloy anode, caused PO43--P and other suspended matter flocculation, improved phosphorus removal and simultaneously reduced turbidity. Thus, electrolysis-integrated ecological floating bed has high nitrogen and phosphorus removal potential in eutrophic water.
Related Concept Videos
Environmental Applications of Microorganisms
Bioremediation

