Screening of nanoemulsion components for asenapine maleate using validated RP-HPLC method

A novel, simple reversed-phase high-performance liquid chromatographic (RP-HPLC) analytical method was developed and validated for the quantitative determination of asenapine from various nanoemulsion components during pre-formulation screening. The developed method was validated according to ICH Q2 (R1) guidelines. The developed and validated method was precisely and accurately quantified asenapine in various oils, surfactants and co-surfactants. The separation of asenapine was carried out on Hypersil BDS C18, 250×4.6mm, 5μm particle size column using methanol: acetonitrile (90:10) as mobile phase with a flow rate of 1mL.min^-1. Measurement at 270nm for the concentration range of 5 to 50μg.mL^-1 of the analyte was found to be linear with the determination coefficient (r²) of 0.999 as calculated by the least square regression method. The validated method was sensitive with LOD of 10.0ng.mL^-1 and LOQ of 30.0ng.mL^-1. Further, the method was precise and accurate, where the intraday and interday precision values were ranged from 0.70-0.95 and 0.36-0.95, respectively with the corresponding accuracy were ranged from 98.80-100.63 and 98.36-100.63. This developed and validated RP-HPLC method for asenapine was applied in the quantitative determination and screening of various oils, surfactants, and co-surfactants during the development of the asenapine maleate nanoemulsion.