A review on approaches for hazardous organics removal from Bayer liquors
Ye Zhang1, Rui Xu1, Honghu Tang1
1School of Minerals Processing and Bioengineering, Central South University, Changsha, Hunan, 410083, China; Key Laboratory of Hunan Province for Clean and Efficient Utilization of Strategic Calcium-containing Mineral Resources, Central South University, Changsha, Hunan, 410083, China.
Abstract:
Alumina is a valuable raw material for the production of adsorbents, abrasives, polishing agents, refractory materials, and aluminum. It is generally produced from bauxites through the Bayer process. Several organic compounds such as humic matters and oxalates are introduced into the Bayer liquor during the digestion process, resulting in significant hazards to precipitation of aluminum hydroxide. Therefore, it is crucial to remove these organic compounds from Bayer liquor to enhance the production of alumina. It is difficult to remove these organic compounds. Various approaches for organics removal from Bayer liquors have been developed in the past few decades, including thermal treatment, chemical precipitation, membrane technology, photocatalytic degradation, biodegradation, and wet oxidation. This paper reviews the technologies for organics removal from Bayer liquor and the relative mechanisms proposed in the literature to identify its essential parameters. Chemicals dosage, temperature, pH value, reaction time, and solution concentration are essential factors in the process. Removal efficiency, green principle, and economic viability of various methods are discussed, and potential technologies are suggested. Wet oxidation appears to be a promising method for removing organic matters in Bayer liquors. Moreover, the combination of wet oxidation and electrooxidation shows excellent potential in organics removal. Various approaches for removing organic compounds and perspectives for further investigation are proposed.
More Related Videos
08:21Isolation and Screening from Soil Biodiversity for Fungi Involved in the Degradation of Recalcitrant Materials
Published on: May 16, 2022
09:38Single-throughput Complementary High-resolution Analytical Techniques for Characterizing Complex Natural Organic Matter Mixtures
Published on: January 7, 2019
Related Concept Videos
00:46Bioremediation
02:23Alcohols from Carbonyl Compounds: Reduction
Catalytic hydrogenation is similar to the reduction of an alkene or alkyne by adding H2 across the pi bond in the presence of transition metal catalysts like Raney Ni, Pd–C, Pt, or Ru. Aldehydes and ketones can be reduced by this method, often under mild to moderate heat (25–100°C) and...
03:08Hydroboration-Oxidation of Alkenes
02:31Protection of Alcohols
Protection
It defines a protecting group as the masking agent to make the more reactive species inert to a given set of conditions. This concept is depicted via the illustration of liquid flow through different outlets in an assembly of pipes. The analogy helps to understand the role...
01:23Drug Elimination: Non-Renal Routes
02:29Ethers from Alcohols: Alcohol Dehydration and Williamson Ether Synthesis
Ethers can be prepared from organic compounds by various methods. Some of them are discussed below,
Preparation of Ethers by Alcohol Dehydration
In this method, in the presence of protic acids, alcohol dehydrates to produce alkenes and ethers under different conditions. For example, in the presence of sulphuric acid, dehydration of ethanol at 413 K yields ethoxyethane, whereas it yields ethene at 443 K.