Preparation of Nanoscale Semi-IPNs with an Interconnected Microporous Structure via Cationic Polymerization of...

Nanoscale semi-interpenetrating polymer networks of bio-based poly(ε-caprolactone) (PCL) and polymerized tung oil have been prepared via in situ cationic polymerization and compatibilization in a homogeneous solution. This novel blending technique produced a nanoscale morphology of poly(ε-caprolactone) with average particle sizes as small as 100 nm dispersed in a cross-linked tung oil matrix for 20 and 30 wt % PCL blend compositions. In addition, the exothermic cationic polymerization of tung oil in the presence of the PCL homogeneous solution created a microporous morphology with open three-dimensional interconnected cluster structures. The porous morphology was found to be composition-dependent (the pore size and interconnectivity decreased with increasing PCL content in the blend). The values of the cross-link density and storage modulus in the glassy state for fully cured samples increased significantly and reached a maximum for the 20 wt % PCL blend. This simple, versatile, low-cost strategy for preparing nanoscale and interconnected three-dimensional cluster structures with a microporous morphology and desired properties should be widely applicable for new polymer systems.