Young's modulus and Poisson ratio of composite materials: Influence of wet and dry storage
Ana Lúcia LourenÇo1, Niek De Jager1, Catina Prochnow2
1Department of Dental Materials Science, Academic Center for Dentistry Amsterdam (ACTA), University of Amsterdam and Vrije Universiteit Amsterdam.
Abstract:
In the oral environment dental materials are subject to a wet condition what might in time change their elastic properties. In this article, we evaluated the influence of the storage condition (dry versus wet) on the Young's modulus and the Poisson ratio in compression of three composite materials. The data of the Young's modulus and Poisson ratio published of dental composite materials are not always comparable, due to different test methods and sample dimensions influencing the results. Therefore, we established the degree of exactness of the results out of the test set-up used. Since the present study depicted differences of the properties after dry and wet storage, the elastic properties should be measured after wet storage. The bonding between the matrix and the filler particles showed to have an influence on the elastic properties and on the influence of a wet environment.
Related Concept Videos
Relation between Poisson's ratio, Modulus of Elasticity and Modulus of Rigidity
Bending of Members Made of Several Materials
Hooke's Law determines stress in each material, stating that stress is proportional to strain but varies due to each material's...
Poisson's Ratio
Dynamic Modulus of Elasticity of Concrete
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by a...
Relation Between Tensile Strength and Compressive Strength of Concrete
Hooke's Law


