Interfacial Energy Measurement on the Reconstructive Polymer Surface: Dynamic Polymer Brush by Segregation of...

Herein, the interfacial energy of a reconstructive polymer surface formed by segregation is analyzed by measuring the change in the size of elastomer thin films floating on water. When a system in which amphiphilic diblock copolymers are mixed with the hydrophobic elastomer is in contact with water, surface reconstruction is triggered by the segregation of copolymers with a gain in the hydration energy of the hydrophilic blocks. The hydrophilic brush layer spontaneously formed at the elastomer-water interface is named the dynamic polymer brush. Although it is anticipated that the interfacial energy will significantly decrease in the dynamic polymer brush system, a direct measurement of the interfacial energy of the reconstructive interface is a challenge. We propose a novel method to measure the interfacial energy of a reconstructive polymer surface by measuring the deformation of elastomer thin films floating on water and apply it to the dynamic polymer brush system. The interfacial energy of the dynamic polymer brush formed by the segregation of amphiphilic diblock copolymers with longer hydrophilic chains drastically decreased to zero due to the high hydration energy of hydrophilic chains. Based on the neutron reflectometry results, the graft density and thickness of the dynamic polymer brush system floating on water were found to be lower than those of the system fixed onto solid substrates. This indicates that the floating system can respond to an external environment with a high degree of freedom (graft density, brush thickness, and interface area).