Ferroelectric Multilayer Nanocomposites with Polarization and Stress Concentration Structures for Enhanced...

Although ferroelectric composites have been reported to enhance the performance of triboelectric (TE) devices, their performances are still limited owing to randomly dispersed particles. Herein, we introduce high-performance TE sensors (TESs) based on ferroelectric multilayer nanocomposites with alternating poly(vinylidenefluoride-co-trifluoroethylene) (PVDF-TrFE) and BaTiO₃ (BTO) nanoparticle (NP) layers. The multilayers comprising alternating soft/hard layers can induce stress concentration and increase the effective stress-induced polarization and interfacial polarization between organic and inorganic materials, leading to a dielectric constant (17.06) that is higher than those of pure PVDF-TrFE films (13.9) and single PVDF-TrFE/BTO nanocomposites (15.9) at 10 kHz. As a result, the multilayered TESs with alternating BTO NP layers exhibit TE currents increased by 2.3 and 1.5 times compared to pure PVDF-TrFE without BTO NPs and PVDF-TrFE/BTO nanocomposites without multilayer structures, respectively. The multilayered TESs exhibit a high pressure sensitivity of 0.94 V/kPa (48.7 nA/kPa) and output power density of 29.4 μWcm^-2, enabling their application in the fabrication of highly sensitive healthcare monitoring devices and high-performance acoustic sensors. The suggested architecture of ferroelectric multilayer nanocomposites provides a robust platform for TE devices and self-powered wearable electronics.