Pyrolysis of Biomass Impregnated With Ammonium Dihydrogen Phosphate for Polygeneration of Phenol and Supercapacitor Electrode Material
Related Experiment Video
Updated: Aug 3, 2026

Fast Pyrolysis of Biomass Residues in a Twin-screw Mixing Reactor
Published on: September 9, 2016
Kai Li1, Bo Wang1, Dana Bolatibieke1
1National Engineering Laboratory for Biomass Power Generation Equipment, North China Electric Power University, Beijing, China.
Abstract:
A new method was proposed for polygeneration of phenol and supercapacitor electrode material from pyrolysis of biomass impregnated with ammonium dihydrogen phosphate (NH4H2PO4). The pyrolysis experiments were executed to demonstrate the product distributions under different NH4H2PO4-to-poplar (PA-to-PL) ratios and pyrolysis temperatures in a lab-scale device. The results revealed that the phenol yield attained its optimal value of 4.57 wt% with a satisfactory selectivity of 20.09% at 500°C under PA-to-PL ratio of 0.6. The pyrolytic solid product obtained at this condition was then subjected to high temperature activation directly without additional activators to prepare N and P co-doped activated carbon (NPAC) as supercapacitor. The physicochemical analysis of NPAC showed that the N and P contents in NPAC reached 3.75 and 3.65 wt%, respectively. The electrochemical experiments executed in a three-electrode system indicated that the NPAC exhibited promising electrochemical performance with a satisfactory capacitance of 181.3 F g-1 at 1 A g-1.
More Related Videos
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for CuII Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
09:46Reducing Willow Wood Fuel Emission by Low Temperature Microwave Assisted Hydrothermal Carbonization
Published on: May 19, 2019