Introducing an Optimization- and explicit Runge-Kutta- based Approach to Perform Dynamic Flux Balance Analysis

Wheaton L Schroeder1, Rajib Saha2

  • 1Department of Chemical and Biomolecular Engineering, University of Nebraska - Lincoln, Lincoln, USA.

Scientific Reports
|June 10, 2020
PubMed

Related Concept Videos

The Power Flow Problem and Solution01:26

The Power Flow Problem and Solution

Power flow problem analysis is fundamental for determining real and reactive power flows in network components, such as transmission lines, transformers, and loads. The power system's single-line diagram provides data on the bus, transmission line, and transformer. Each bus k in the system is characterized by four key variables: voltage magnitude Vk​, phase angle δk​, real power Pk​, and reactive power Qk​. Two of these four variables are inputs, while the power flow program computes...
718
Fast Decoupled and DC Powerflow01:24

Fast Decoupled and DC Powerflow

The fast decoupled power flow method addresses contingencies in power system operations, such as generator outages or transmission line failures. This method provides quick power flow solutions, essential for real-time system adjustments. Fast decoupled power flow algorithms simplify the Jacobian matrix by neglecting certain elements, leading to two sets of decoupled equations:
653
Calculation of Electric Flux01:25

Calculation of Electric Flux

Consider the electric field of an oppositely charged, parallel-plate system and an imaginary box between those plates. Let the bottom face of the box be ABCD, and the top face be FGHK. The electric field between the plates is uniform and points from the positive plate toward the negative plate. The calculation of this field's flux through the box's various faces shows that the net flux through the box is zero. Why does the flux cancel out here?
2.7K
Turbulent Flow: Problem Solving01:09

Turbulent Flow: Problem Solving

Carbonation is a process used to dissolve carbon dioxide gas in a liquid, commonly used in the production of carbonated beverages. Achieving efficient carbonation requires careful control of temperature, pressure, and flow conditions. By adjusting these parameters, carbonation efficiency can be maximized, producing a higher concentration of CO2 in the liquid.
Temperature is a key factor in CO2 solubility. In this case, the CO2 gas and the liquid are cooled to 20°C. Lower temperatures enhance...
326
Bernoulli's Equation for Flow Along a Streamline01:30

Bernoulli's Equation for Flow Along a Streamline

Bernoulli's equation relates the energy conservation in a fluid moving along a streamline. The equation applies to incompressible and inviscid fluids under steady flow. For such a flow, Newton's second law is applied to a small fluid element, which experiences forces due to pressure differences, gravity, and velocity variations. The force balance leads to the following form of Bernoulli's equation:
1.3K
Eulerian and Lagrangian Flow Descriptions01:22

Eulerian and Lagrangian Flow Descriptions

Fluid flow analysis is critical in many scientific and engineering disciplines, and two principal approaches are used to describe this flow: the Eulerian and Lagrangian methods. These methods offer different perspectives on monitoring and analyzing the motion of fluids, each with distinct advantages depending on the scenario.
The Eulerian method focuses on fixed points in space where fluid properties, such as velocity, pressure, and temperature, are observed as the fluid moves between these...
1.8K