Related Experiment Video
Updated: Dec 18, 2025

Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators
Published on: August 15, 2014
Synchronization Control for Discrete-Time-Delayed Dynamical Networks With Switching Topology Under Actuator
Abstract:
This article is concerned with the synchronization control problem for a class of discrete-time dynamical networks with mixed delays and switching topology. The saturation phenomenon of physical actuators is specifically considered in designing feedback controllers. By exploring the mixed-delay-dependent sector conditions in combination with the piecewise Lyapunov-like functional and the average-dwell-time switching, a sufficient condition is first established under which all trajectories of the error dynamics are bounded for admissible initial conditions and nonzero external disturbances, while the l2 - l∞ performance constraint is satisfied. Furthermore, the exponential stability of the error dynamics is ensured for admissible initial conditions in the absence of disturbances. Second, by using some congruence transformations, the explicit condition guaranteeing the existence of desired controller gains is obtained in terms of the feasibility of a set of linear matrix inequalities. Then, three convex optimization problems are formulated regarding the disturbance tolerance, the l2 - l∞ performance, and the initial condition set, respectively. Finally, two simulation examples are given to show the effectiveness and merits of the proposed results.
More Related Videos
06:04Experimental Investigation of the Hierarchical Control in DC Microgrids Using a Real-time Simulator
Published on: February 14, 2025
06:45Design and Application of a Fault Detection Method Based on Adaptive Filters and Rotational Speed Estimation for an Electro-Hydrostatic Actuator
Published on: October 28, 2022
Related Concept Videos
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
BIBO stability of continuous and discrete -time systems
To determine the BIBO stability, the convolution integral is utilized when a bounded continuous-time input is applied to a Linear Time-Invariant (LTI) system....
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Simplified Synchronous Machine Model
In this model, each generator is connected to a...