Related Experiment Video
Updated: Dec 18, 2025

Curtain Flow Column: Optimization of Efficiency and Sensitivity
Published on: June 12, 2016
Stationary-phase optimized selectivity in supercritical fluid chromatography using a customized Phase OPtimized
Yasmine Grooten1, Petra Riasová1,2, Inês Salsinha1
1Department of Analytical Chemistry, Applied Chemometrics and Molecular Modelling, Vrije Universiteit Brussel (VUB), Laarbeeklaan 103, 1090, Brussels, Belgium.
Abstract:
The use of stationary-phase optimized selectivity in liquid chromatography (SOS-LC) was shown to be successful for HPLC to analyze complex mixtures using a Phase OPtimized Liquid Chromatography (POPLC) kit. This commercial kit contains five stationary-phase types of varying lengths, which can be coupled to offer an improved separation of compounds. Recently, stationary-phase optimized selectivity supercritical fluid chromatography (SOS-SFC) has been introduced, transferring the methodology to SFC. In this study, the applicability of a customized POPLC expert kit for isocratic SFC runs was explored. Five stationary-phase chemistries were selected as potentially most suitable for achiral separations of polar compounds: aminopropyl (amino), cyanopropyl (CN), diol, ethylpyridine (EP), and silica. The retention factors (k) on the individual stationary phases were used for the prediction of the best stationary-phase combination, based on the POPLC algorithm (via the included software). As an alternative, the best column combination was predicted using multiple linear regression (MLR) models on the results obtained from a simplex centroid mixture design with only three stationary-phase types (amino, silica, and EP). A third approach applied the isocratic POPLC algorithm on the same three stationary-phase data. The proposed combinations were assembled and tested. The predicted and experimental retention factors were compared. The predictions based on the POPLC algorithm provided a stationary phase showing a complete separation of the mixture. The stationary phase suggested by the MLR models, on the other hand, showed co-elution of two compounds, due to an unexpected experimental retention shift. Overall, the customized POPLC kit showed good potential to be applied in SFC. Graphical abstract.
More Related Videos
10:14Synthesis and Purification of Iodoaziridines Involving Quantitative Selection of the Optimal Stationary Phase for Chromatography
Published on: May 16, 2014
10:21Automated Hydrophobic Interaction Chromatography Column Selection for Use in Protein Purification
Published on: September 21, 2011
Related Concept Videos
Supercritical Fluid Chromatography
SFC utilizes a supercritical fluid mobile phase,...
Gas Chromatography: Types of Columns and Stationary Phases
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...
Optimizing Chromatographic Separations
Band broadening refers to spreading solute bands as they travel through the column. This broadening can impact resolution. Plate height (H) represents the length required for one theoretical plate. A lower plate height corresponds to...
High-Performance Liquid Chromatography: Introduction
In HPLC, two phases play a critical role in the separation process:
Chromatography: Introduction
The phase in which the compounds linger or on which the compounds adsorb is called the stationary phase, whereas the mobile phase is the solvent that carries the solutes to be analyzed. In traditional column chromatography, the mixture flows through the stationary phase, and the compounds partition between the stationary and mobile phases...
High-Performance Liquid Chromatography: Elution Process