[Investigation and analysis of occupational exposure factors in an enterprise processing waste electronic products]

Objective: To identify and to analyze occupational exposure factors generating from production process in an enterprise processing waste electronic products, to provide scientific evidences for protection measures. Methods: From June to October 2017, seven waste electrical and electronic product processing enterprises in a province were selected as the research objects. These seven enterprises all include refrigerator dismantling line, washing machine dismantling line, air conditioning dismantling line, TV/computer dismantling line, CRT cutting line. Some enterprises also have circuit board line, wet precious metal recycling line, plastic crushing line, plastic granulating line and other deep processing operations such as precious metal recycling of waste circuit board, waste plastic crushing and recycling. The data were collected by the methods of occupational health field investigation and occupational health testing, and the exposure level of occupational hazard factors was evaluated by combining the effect of the protective facilities of occupational health engineering. Results: the main occupational hazard factors of waste electrical and electronic products treatment enterprises were dust, noise, heavy metal, flame retardant, mercury, fluoride, cyanide, sodium hydroxide, hydrochloric acid and nitric acid. 145 effective samples were obtained from heavy metal sampling, including 102 individual samples and 43 fixed-point long-term samples. Among them, 8 samples lead exceeded the standard, all occurred in the TV dismantling line. In addition to flame retardants, plasticizers, insecticides and other components can be detected by high-throughput qualitative analysis using liquid chromatography-time-of-flight mass spectrometry. Finally, 123 effective 8-h equivalent sound level values were obtained by individual noise detection, 86 of which exceeded the standard, with a rate of 69.9%. Conclusion: there are potential occupational hazards in the process of dismantling waste electrical and electronic products.