The comparative performance of DBS artefact rejection methods for MEG recordings

Deep brain stimulation (DBS) can be a very efficient treatment option for movement disorders and psychiatric diseases. To better understand DBS mechanisms, brain activity can be recorded using magnetoencephalography (MEG) with the stimulator turned on. However, DBS produces large artefacts compromising MEG data quality due to both the applied current and the movement of wires connecting the stimulator with the electrode. To filter out these artefacts, several methods to suppress the DBS artefact have been proposed in the literature. A comparative study evaluating each method's effectiveness, however, is missing so far. In this study, we evaluate the performance of four artefact rejection methods on MEG data from phantom recordings with DBS acquired with an Elekta Neuromag and a CTF system: (i) Hampel-filter, (ii) spectral signal space projection (S3P), (iii) independent component analysis with mutual information (ICA-MI), and (iv) temporal signal space separation (tSSS). In the sensor space, the largest increase in signal-to-noise (SNR) ratio was achieved by ICA-MI, while the best correspondence in terms of source activations was obtained by tSSS. LCMV beamforming alone was not sufficient to suppress the DBS-induced artefacts.