Construction and optimization mechanisms of carbon fiber-based flow-through electrode system (FES) with stackable...

The stackable carbon fiber-based flow-through systems (m(nC + 1A)) were constructed, where the multi-cathode units (nC + 1A) were equipped with multiple cathodes (nC) and a counter anode (1A), and the m was the stackable numbers of the nC + 1A units. The configuration of the m(nC + 1A) systems with m and n values from 1 to 6 was optimized by comparing their disinfection performance toward a model pathogen (Escherichia coli) from the aspects of disinfection ability, energy consumption and HRT. For multi-cathode units (nC + 1A), increasing the cathode numbers (n) promoted the E. coli inactivation by the predominant direct oxidation on the anode. Among the stackable m(nC + 1A) modules, the 3(3C + 1A) module was recommended as the best configuration. In the stackable 3(3C + 1A) module with consecutive reduction-oxidation processes, the E. coli inactivation mechanisms were attributed to the direct oxidation on the anodes and H₂O₂-induced indirect oxidation on the cathodes. The synergistic effect between the stackable 3C + 1A units promoted the electro-redox of the electrodes and their disinfection ability, which was also accompanied by the enhancement of energy consumption for O₂/H₂O₂ mutual transformation on the electrodes. In turn, the modules with excessive stackable unit numbers (m > 3) over-promoted the competitive reaction of O₂/H₂O₂ mutual transformation, restraining the disinfection performance.