Related Experiment Video
Updated: Dec 18, 2025

Individualized Stem-positioning in Calcar-guided Short-stem Total Hip Arthroplasty
Published on: February 27, 2018
Does the line-to-line cementing technique of the femoral stem create an adequate cement mantle?
Kirsti Sevaldsen1,2, Otto S Husby2,3, Øystein B Lian1,2
1Department of Orthopaedic Surgery, Kristiansund Hospital, Kristiansund, Norway.
Background:
The line-to-line cementing technique is proposed to create a press-fit in the femoral canal, which is contrary to modern cementing techniques. The term 'French paradox' has been used to describe the acceptable results associated with this technique. It has been suggested that the quality of the mantle may not be satisfactory, predisposing to early failure and aseptic loosening.
Methods:
The line-to-line cementing technique, where the femoral stem was oversized by 1 size compared to the broach, was compared to the standard cementing technique using corresponding sized broaches and stems, in 6 pairs of human cadaver femora with taper-slip design C-stems. Cement pressure was measured, and cement mantle thickness was analysed. A mixed effects model with random intercepts was used to examine the relationship between thickness of mantle and cementing technique and between pressure and cementing technique.
Results:
Line-to-line cementing results in significantly higher pressurisation for longer periods of time leading to better interdigitation but a thinner mantle in some areas.
Conclusions:
The results of this study describe the in-vitro advantages and disadvantages of the line-to-line cementing technique.
More Related Videos
06:38Establishment of a Segmental Femoral Critical-size Defect Model in Mice Stabilized by Plate Osteosynthesis
Published on: October 12, 2016
08:20A Reliable and Reproducible Critical-Sized Segmental Femoral Defect Model in Rats Stabilized with a Custom External Fixator
Published on: March 24, 2019
Related Concept Videos
Soundness of Cement
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
Porosity in Cement Paste
The balance of water to cement in the mix is...
Fineness of Cement
Direct...