Noble metal-based sorbents: A way to avoid new waste after mercury removal

The development of technologies to control mercury emissions is now a legal requirement imposed by recent international agreements. The use of regenerable sorbents is consistent with this requirement as it allows mercury to be captured from industrial gases without generating new mercury-containing toxic waste. Because regenerable sorbents based on noble metals are often questioned due to the heavy investment they entail, this study assesses the viability of their use in terms of efficiency and cost. Its primary aim is to develop new regenerable sorbents based on an activated carbon support impregnated with Ag in order to compare their cost and behavior in a CO₂ enriched gas stream with that of similar materials containing Au. Mercury retention efficiencies of 100 % can be achieved over several adsorption-desorption cycles depending on the type of noble metal used, particle size and impurities in the gas atmosphere. The results suggest that the Hg-Ag amalgamation process differs from the Hg-Au one, in that they show different kinetics of adsorption and temperatures of desorption. The Ag and Au regenerable sorbents developed in this study would be competitive given the environmental and health benefits they offer compared to the single-use activated carbons employed until now at industrial scale.