Related Experiment Video
Updated: Aug 11, 2026

Rapid Nanoprobe Signal Enhancement by In Situ Gold Nanoparticle Synthesis
Published on: March 7, 2018
Ordered gold-coated glass nano-sting array with large density tips as highly SERS-active chips for detection of trace
Qian Zhao1, Guangqiang Liu1, Hongwen Zhang1
1Key Lab of Materials Physics, Anhui Key Lab of Nanomaterials and Nanotechnology, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031, Anhui, People's Republic of China.
Abstract:
A simple and cost-effective route to fabricating gold-coated glass nano-stings' arrays is presented for highly efficient surface enhanced Raman spectroscopy (SERS) chips via reactive ion etching of the glass slide covered with polystyrene (PS) colloidal monolayer and sputtering deposition of gold on it. The as-fabricated SERS chips consist of the nearly-hemispherical particles with submicron-size, which are hexagonally arranged into the ordered arrays. There are many short and long Au-coated glass nano-stings standing vertically on the hemispherical particles, showing high density tips (up to 7.0 × 103 μm-2). The formation of such gold-coated glass hierarchically structured array is attributed to the geometry of PS colloidal monolayer and the nanoscale roughness of glass slide's surface. Further, it has been demonstrated that such gold-coated glass array chip is highly SERS-active and can be utilized to detect trace organophosphorous toxicant with the limit below ppt level and good reproducibility in measurements. The intensity of the Raman peak shows the linear relation, in logarithmic scale, with the organophosphorous concentration from ppt to ppm level, exhibiting the possibility of quantitative detection in a large concentration range. This work has demonstrated the cost-effective method to fabricate the high performance SERS chips for trace detection of toxic molecules.

