Classification of heart sound signals using a novel deep WaveNet model
Shu Lih Oh1, V Jahmunah1, Chui Ping Ooi2
1School of Engineering, Ngee Ann Polytechnic, 535 Clementi Road, Singapore 599489, Singapore.
Background And Objectives:
The high mortality rate and increasing prevalence of heart valve diseases globally warrant the need for rapid and accurate diagnosis of such diseases. Phonocardiogram (PCG) signals are used in this study due to the low cost of obtaining the signals. This study classifies five types of heart sounds, namely normal, aortic stenosis, mitral valve prolapse, mitral stenosis, and mitral regurgitation.
Methods:
We have proposed a novel in-house developed deep WaveNet model for automated classification of five types of heart sounds. The model is developed using a total of 1000 PCG recordings belonging to five classes with 200 recordings in each class.
Results:
We have achieved a training accuracy of 97% for the classification of heart sounds into five classes. The highest classification accuracy of 98.20% was achieved for the normal class. The developed model was validated with a 10-fold cross-validation, thus affirming its robustness.
Conclusion:
The study results clearly indicate that the developed model is able to classify five types of heart sounds accurately. The developed system can be used by cardiologists to aid in the detection of heart valve diseases in patients.
Related Concept Videos
01:30Classification of Signals
A continuous-time signal holds a value at every instant in time, representing information seamlessly. In contrast, a discrete-time signal holds values only at specific moments, often denoted as x(n), where...
01:15Heart Sounds
Auscultation is the process of listening to these internal body sounds using a stethoscope. The heart produces four types of sounds, but only two—S1 and S2—can usually be heard with a stethoscope.
S1, also known as the "lub" sound, is caused by the closure of atrioventricular (A-V)...
01:22Force Classification
Contact and non-contact forces are two of the most widely used categories of forces. As the name suggests, contact forces require physical contact between two objects to act upon each other. Examples of contact forces include frictional,...
01:26Classification of Systems-I
Homogeneity dictates that if an input x(t) is multiplied by a constant c, the output y(t) is multiplied by the same constant. Mathematically, this is expressed as:
01:31Classification of Systems-II