Related Experiment Video
Updated: Dec 16, 2025

Author Spotlight: Standardizing the Development of Amine-Based Silica Composites as CO2 Adsorbents for Direct Air Capture
Published on: September 29, 2023
Preparation and characterization of myristic acid/expanded graphite composite phase change materials for thermal
Dongyi Zhou1,2,3, Jiawei Yuan1, Yuhong Zhou1
1School of Mechanical and Energy Engineering, Shaoyang University, Shaoyang, 422000, China.
Abstract:
Myristic acid/expanded graphite (MA/EG) composite phase-change material (CPCM) was prepared by absorbing liquid MA (as the PCM) into EG (as the supporting material). Its chemical structure, microstructure, and thermal properties were characterized and studied. In the MA/EG CPCM, the largest mass content of MA was 93.5% by using the diffusion-exudation circle method for the first time. Fourier transform infrared spectroscopy (FTIR) analysis indicated that the MA and EG were a pure physical mixture of which the structure does not change, and they undergo no chemical reaction. Differential-scanning-calorimetry (DSC) analysis results showed that the melting and freezing temperatures of the MA/EG CPCM were 53.3 and [Formula: see text], respectively, and the melting and freezing latent heats were 189.5 and 187.8 J/g, respectively. After several heat-cycle accelerations, the material still had good thermal-energy-storage effect. MA/EG CPCM thermoconductivity was greatly enhanced after adding EG, and the results of thermal-storage/-release experiments indicated that the thermal-storage and -release ratios of the MA/EG phase-change unit was greatly improved when compared with that of MA. These results indicated that the MA/EG CPCM was a suitable low-temperature thermal-energy-storage material.
More Related Videos
09:39Production and Testing of Moisture Behavior and Thermal Properties of Rapeseed Straw and Ganoderma resinaceum Mycelium Bio-Composites
Published on: September 5, 2025
10:36Author Spotlight: Optimization of Airflow Velocities in Battery Cooling Systems for Enhanced Thermal Performance and Reduced Energy Consumption
Published on: November 3, 2023
Related Concept Videos
Thermal expansion and Thermal stress: Problem Solving
To solve the problem, first, identify the known and unknown quantities. The initial length (L) of the bridge is 1275 m, the coefficient of linear expansion (α) for steel is 12 x 10-6/°C, and the change in temperature (ΔT) is 55...
Thermal Sigmatropic Reactions: Overview
Sigmatropic shifts are classified based on an order term [i, j ], where i and j indicate the number of atoms across which each end of the σ bond migrates. Below are examples of a [3,3] sigmatropic shift in 1,5-hexadiene, referred...
Phase Changes
A substance melts or freezes at a temperature called its melting point and boils or condenses at its boiling point. These temperatures depend on pressure. High pressure favors the denser form of the substance, so typically, high pressure...