Related Experiment Video
Updated: Dec 16, 2025

Watershed Planning within a Quantitative Scenario Analysis Framework
Published on: July 24, 2016
Assessment of watershed characteristics with limited water quantity and quality data
1Department of Civil Engineering, Daegu University, 201 Daegudae-ro, Jillyang, Gyeongsan, Gyeongbuk, 31824, South Korea. kimtj@daegu.ac.kr.
Abstract:
The evaluations of water quantity and quality and then modeling of its phenomenon are required for water quality protection in Brady Creek watershed. This study is to predict the monthly flow, reservoir storage volume, and salinity; estimate the benefit of brush and aging flood-retardation dam control; and evaluate the impact of evaporation and discharge from Waste Water Treatment Plans (WWTP). The Soil and Water Assessment Tool (SWAT) model is verified with the monthly flow developed for pre-dam construction condition and shows the difference of - 9% and 10% than measured average flow for calibration and validation periods, respectively. The SWAT monthly flows are adjusted by 1963-2010 yearly conversion factors and are used as the input in the Water Rights Analysis Package (WRAP) model. The WRAP model verified with measured reservoir storage volume and total dissolved solid shows the average differences of simulated reservoir storage volume and salinity by - 13% lower and 11% higher for calibration period and 0% and 3% higher for validation period than measured average value, respectively. The impacts from brush and dams controls increase the runoff but also increase the water quality parameters. The impact of evaporation and WWTP discharge provide the information of relative impact for watershed phenomenon.
Related Concept Videos
Quality of Water
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Testing Water Quality
Conservation of Mass in Moving, Nondeforming Control Volume
In the context of a detention basin, the conservation of mass states that the total mass of water entering the basin must equal the mass leaving the basin plus any accumulation of...
Responses to Drought and Flooding
Design Example: Design of an Irrigation Channel

