Inactivation of Bacteria by Peracetic Acid Combined with Ultraviolet Irradiation: Mechanism and Optimization
Related Experiment Video
Updated: Dec 15, 2025

Inactivation of Pathogens via Visible-Light Photolysis of Riboflavin-5′-Phosphate
Published on: April 6, 2022
Tianqi Zhang1, Ting Wang1, Benjamin Mejia-Tickner1
1School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States.
Abstract:
Peracetic acid (PAA) is an emerging disinfectant for municipal wastewater treatment owing to good biocidal effects and limited harmful by-product formation. This study investigated the inactivation of Gram-negative Escherichia coli (E. coli) and Gram-positive Enterococcus durans (E. durans) and Staphylococcus epidermidis (S. epidermidis) by PAA combined with UV concurrently (UV/PAA) or sequentially (PAA-UV/PAA) for enhanced disinfection. Under UV/PAA, the contributions of different mechanisms (UV, PAA, reactive radicals (mainly •OH and CH3C(O)OO•), and the synergistic effect of all mechanisms involved) to the overall inactivation were quantitatively assessed. Results revealed that radicals played a moderate role in the enhanced disinfection, while the synergistic effect presented a greater contribution, which could be partially linked to the diffusion of PAA into the cells as evidenced for the first time by a fluorescence microscopic method. Taking advantage of PAA diffusion into bacteria, pre-exposure of PAA followed by UV/PAA was demonstrated to yield the highest disinfection efficiency. Indeed, compared to UV/PAA, PAA-UV/PAA could achieve additional 4.7-5.4, 4.1-5.3, and 2.9-3.4 log inactivation of E. coli, E. durans, and S. epidermidis, respectively, in clean water and secondary/tertiary wastewater effluents when the same amounts of PAA and UV doses were applied in both approaches. Bacterial regrowth tests confirmed minimal regrowth potential after the disinfection.
More Related Videos
11:47Evaluation of the Efficacy of Organic Peroxyacids for Eradicating Dairy Biofilms Using an Approach Combining Static and Dynamic Methods
Published on: December 9, 2022
05:57The Synergistic Effect of Visible Light and Gentamycin on Pseudomona aeruginosa Microorganisms
Published on: July 2, 2013
Related Concept Videos
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Chemical Agents for Microbial Control
Physical Methods for Controlling Microbial Growth: Temperature
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Antimicrobial Effectiveness
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...