Related Experiment Video
Updated: Dec 15, 2025

Spatial Multiobjective Optimization of Agricultural Conservation Practices using a SWAT Model and an Evolutionary Algorithm
Published on: December 9, 2012
No-regret selection of effective control handles for integrated urban wastewater systems management under parameter
J M Ledergerber1, T Maruéjouls2, P A Vanrolleghem1
1modelEAU and CentrEau, Université Laval, Québec, Canada
Abstract:
Regulatory water quality limits are extended from the wastewater resource recovery facility (WRRF) to the sewer system. It is thus necessary to properly integrate those systems for the evaluation of the overall emissions to the receiving water. The integration of the sewer system and the WRRF, however, leaves us with multiple potential options to reduce these emissions. The proposed approach builds on previous research using global sensitivity analysis (GSA) as a screening method for available control handles. It considers parameter and input uncertainty to select control handles that generate large benefits even if the model differs from reality. Results from a real-life case study indicate that the three top-rated handles are comparably effective for all considered uncertainty and variability scenarios. But the results also showed that this does not apply to lower-rated handles.
More Related Videos
Related Concept Videos
Control Systems
At the heart...
Conservation of Mass in Moving, Nondeforming Control Volume
In the context of a detention basin, the conservation of mass states that the total mass of water entering the basin must equal the mass leaving the basin plus any accumulation of...
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Parameters Affecting Nonlinear Elimination: Zero-Order Input, First-Order Absorption and Two-Compartment Model
When a drug is administered through a constant intravenous infusion and eliminated via nonlinear pharmacokinetics, it follows zero-order input. For example, oral drugs undergo first-order absorption upon administration and are eliminated through nonlinear pharmacokinetics.
In the case of subcutaneously administered drugs,...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...

